6
Installing the fan
1. Hanger bracket installation
All electrical work should only be undertaken by a licensed electrician and after disconnection
of the power by removing fuses or turning off the circuit breaker to ensure all poles isolation of
the electrical supply.
The following steps will guide you to a successful installation:
1. Hanger bracket installation
2. Seat ceiling fan motor into hanger bracket and insert remote receiver module
3. Remote control installation and wiring, install ceiling canopy
4.
Install ceiling fan blades
5. Attach the blade cover
The hanger bracket should be screwed on to a firm flat
surface. The fixing location must be able to withstand
four times the static weight of the fan. Due to the size
of the Kirra ceiling fan, four (4) wood screws provided
should be used to securely mount the hanger bracket.
2. Seat ceiling fan and insert remote receiver
Slide the remote control receiver module
into the gap in the hanger bracket as shown.
Carefully store wiring within the bracket.
Beware of pinching wires.
Carefully lift the fan and seat the downrod
ball assembly on the hanger bracket. Be sure
the groove in the ball is lined up with the tab
on the hanger bracket. Do not pinch wires
between the ball and downrod assembly and
hanger bracket.
