3
Important Safety Instructions
1. Read your owner’s manual and safety information before installing your new fan. Review the accompanying
assembly diagrams.
2.
Before servicing or cleaning unit, switch power off at fuse box / circuit breaker and lock box (disconnecting
means to prevent power from being switched on accidentally).
3.
Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power
to the ceiling fan before servicing.
4.
Do not insert anything into the fan blades while the fan is operating.
5. Do not operate reversing switch until fan blades have come to a complete stop.
6. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
7. Contact your local government for information regarding the collection systems available.
8.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater
and get into the food chain, damaging your health and well-being.
9.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
10. Children should be supervised to ensure that they do not play with the appliance.
WARNING: To avoid fire, shock and serious personal injury, follow these instructions.
Additional Safety Instructions
1.
To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan
without blades.
2.
All wiring and installation procedures must comply with AS/NZS 3000 Wiring Rules and any other local
regulations. The ceiling fan must be grounded as a precaution against possible electrical shock. Electrical
installation
must be made by a licensed electrician
.
3. The fan base must be securely mounted and capable of reliably supporting at least
four times the weight
of the ceiling fan
. The installation and replacement of the suspension system must be completed by the
manufacturer, its service agent or a suitably qualified person.
4. The fan must be mounted with the fan blades at least 2.1 meter (lowest edge) from the floor to comply with
safety regulations and to prevent accidental contact with the fan blades.
5. Follow the recommended instructions for the proper method of wiring this ceiling fan.
6. This fan must be installed with an isolation switch or a device to disconnect all poles.
WARNING:
This product is designed to use only those parts supplied with this product and/or accessories
designated specifically for use with this product. Using parts and/or accessories not designated for use with this
product will void your warranty and could result in personal injury or property damage.
WARNING:
To reduce the risk of personal injury, do not bend the blade bracket (flange or blade holder) when
installing the brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating
fan blades.
WARNING:
This fan MUST be installed with an easily accessible isolating device to disconnect all poles of the fan
from the main supply.
WARNING:
If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the
manufacturer, its service agent or suitably qualified persons.
IMPORTANT:
This product must be
installed by a licensed electrician and
comply with AS/NZS 3000 Wiring Rules
and any other local regulations.
