Thrane&Thrane TT-3080A, User Manual, Page: 82 / 124

Basic functions Basic functions Basic functions Basic functions Phone setup Phone setup Phone setup Phone setup
Page Page Page Page 6-12 6-12 6-12 6-12 7Sep01 7Sep01 7Sep01 7Sep01
The Route incoming Route incoming Route incoming Route incoming menu is used to configure the terminal with
the IMN numbers (handset, 2-wire analog interfaces, ISDN etc).
The Route outgoing Route outgoing Route outgoing Route outgoing menu is used to select which IMN-number
should be used for billing for each of the different hardware
interfaces and thus a default service type is also selected. An
example: The handset is configured to always use inexpensive
mini-M voice, if a call is initiated from here, whereas one of the
analogue phone interfaces is configured to always use “3.1 kHz
audio” when a call is initiated from here.
To give a better overview of these three submenus the figure
below indicates the routing matrix representing all three menus
as can be seen in the PC configuration software. The X’s indicates
which IMNs are routed to which hardware interface, whereas #
indicates default IMN for billing and thus service type for each
hardware interface.
The Security Security Security Security menu is used to insert/edit/activate/deactivate PIN
codes and to confine the usage in different ways. You can for
example lock the terminal so that only the phone numbers stored
in the phone book may be dialled.
The Sleep mode Sleep mode Sleep mode Sleep mode menu is used to enable/disable the sleep mode
functions, which saves battery power and thus prolongs the
standby time.