Thrane&Thrane TT-3080A, User Manual, Page: 79 / 124

Satellite setup Satellite setup Satellite setup Satellite setup Basic functions Basic functions Basic functions Basic functions
7Sep01 7Sep01 7Sep01 7Sep01 Page Page Page Page 6-9 6-9 6-9 6-9
This menu is used to select area and LES operator. It contains the
following sub menus:
•
LES
• Area
• Spot-beam
The LES LES LES LES menu contains the following sub menus:
•
Default LES
• Prefer LES
• Allowed LES
• Std def LES
• Std pref LES
• Std all LES
The Default LES Default LES Default LES Default LES list contains a list of those LES operators which
may be selected as gateway to the terrestrial network. The last
used LES will be marked with * and this LES will also be the first
LES tried next time the terminal is logged on. Use
to select.
The Allowed LES
Allowed LES Allowed LES
Allowed LES list contains all available LES operators. Those
operators marked with * can be used as Default LES operator and
thus appears in the Default LES list above. If all LES operators are
allowed and can be used there are no markings.
As there are many operators, you can use Prefer LES
Prefer LES Prefer LES
Prefer LES to make
selection easier. The Prefer LES Prefer LES Prefer LES Prefer LES list can be used to indicate in
which order LES operators should appear on the Default LES list.
This is done by entering a number for each LES in the list –
number 1 will appear first in the default LES list.
These lists can only be read and changed when the terminal is in
contact with the NCS – receiving the signal from the NCS. And the
allowed LES operators can only be selected when PIN2 is known –
see section 6.7.4 Security.