Thrane&Thrane TT-3080A, User Manual, Page: 43 / 124

Pointing the antenna Pointing the antenna Pointing the antenna Pointing the antenna Getting started Getting started Getting started Getting started
7Sep01 7Sep01 7Sep01 7Sep01 Page Page Page Page 4-5 4-5 4-5 4-5
The frictional joint between antenna-part and bracket will ensure
that the angle between the two is kept fixed after manual
adjustment of the angle is finished.
To find the correct vertical angle to the satellite, try with the
antenna adjusted to 60
o , 30 o or 0 o as indicated on the next
drawing.
Aim the antenna towards the estimated position of the satellite
with free line of sight
free line of sight free line of sight
free line of sight.
Using the compass on the front of the antenna adjust the antenna
so that azimuth and elevation approximately fits the read values
on the coverage maps.
Use the audible signal strength indicator on the antenna to search
for the maximum signal. See detailed information on how to use
the audible signal strength indicator in chapter 4.4
4.2.2 TT-3008B Big Dish antenna
Below is shown an overview of the optional 3008B Big Dish
antenna, which consists of a flat panel antenna element and a
supporting frame. The HPA-LNA is mounted on the back of the
antenna element.
0°
30° 60°