ThoroughClean D10R-30C Trailer, Operator'S Manual, Page: 4 / 28

WWW.THOROUGHCLEAN.COM.AU
2.1 INITIAL SET-UP
Inspect shipment for damages during transit. Report any damages to your transport
company by writing details on delivery docket before signing.

Fill the water tank with water to above the float level as required.
 For continuous work while water blasting...
o
Use a supply hose with minimum 20 mm inside diameter
O
Required minimum, of 10 PSI / 21 LPM (Litres per minute) to keep the tank
full /topped up while working.

Last Checks:
o
Check oil levels in H.P. Pump & Slave Tank. Fill up with SAE 30 or SAE
15W40 if required.
o
Check fuel level - fill up if required using CLEAN & FRESH DIESEL FUEL
o
Check engine air cleaner is in place, tight and unblocked
o
Ensure the tank has enough water to keep going for a while and that there
are no obvious water leaks
o
Visually check lance & gun assembly
Please read Safety Instructions and special Site Specific Instructions first.
2. INSTALLATION & SET UP
2.2 OPERATOR INSTRUCTIONS - Starting your KOHLER diesel engine
1.Unroll high pressure hose on reel ensure there are no kinks in it.
2. Starting Procedure:
o
Ensure the fuel is open (the lever on the fuel solenoid should face up - see
‘A’ in photo 1)
o
Press the compression lever on top of the engine and hold down / depress
(to by-pass low oil pressure shutdown function and allow engine to start).
(See photo 2)
o Turn the start key clockwise and when the engine cranks over once or
twice, release the compression lever. Engine will fire up and start.
Photo 1. Photo 2.
Machine is now running, pump is pumping and system is in by-pass (until trigger on gun
All manuals and user guides at all-guides.com