
WWW.THOROUGHCLEAN.COM.AU
o
Engine Speed (Not too low)
o
Power Supply (Not too low when using long leads on 240 Volt units)
o
Suction Filters (Blocked?)
o
Water supply volume (Not too low)
As a guide in normal use, consider the following:
- After replacing 10 H.P. Stainless Steel jets, it is time to replace the seals on the
pump using a Seal Kit.
- At the same time, also replace the seals on the By-Pass Valve using a By-Pass kit
- Do a whole pump changeover at 1,000 hours. (Con Rods, Big Ends & Crankshaft)
- Pistols, swivels & H.P Hose damage is usually uneconomical to repair. Replace
when necessary.
- By-Pass Valves will take 3-5 rebuilds before body wear becomes too much and
replacement is needed.
TRAILER
- Check wheel bearings periodically - re-grease or replace when necessary
- Tighten any nuts/bolts after the first 1,000 km
- Check coupling is fitting tightly onto tow bar ball - adjust if necessary.
IMPORTANT MAINTENANCE TIPS:
All manuals and user guides at all-guides.com
Summary of Contents for D10R-30C Trailer
