KATflow 150
4 Operation
4.4.2
3-line display format
Display screen
Operation
The three-line display screen is configure-
able to show flow, totalizers and diagnostic
functions.
Change to diagnostic displays by pressing
<DISP>
and to totalizer screens by press-
ing
<NEXT>.
Cycle through display screens using
<NEXT>.
4.4.3
Diagnostic Displays
Display screen
Operation
Line 1 shows the amplifier gain.
Line 2 displays the signal strength.
Line 3 indicates the noise.
Change to more diagnostic displays by press-
ing
<NEXT>
.
4.4.4
Totalisers
The totaliser displays will only be shown when the totalisers are activated.
Display screen
Operation
The flow totalizer may be assigned to lines in
the three line display, the datalogger or pro-
cess outputs. They can be started or reset by
pressing
<Q
ON
>
.
Pressing
<Q
+
>
resets the total accumulated
flow in positive flow direction. Pressing
<Q->
resets the total accumulated flow in negative
flow direction.
The totalizers can be stopped by activating
<Q
OFF
>
. Pressing
<Q
ON
>
again will reset to
zero.
Change to other displays or revert to the three
line display screen without resetting by press-
ing
<DISP>
or
<NEXT>
.
26
Diagnostic screens
Totalisers
