GPX3800 and GPX3850 Glass Processors
Chapter 6: Added Capabilities of GPX3800 / GPX3850
Rev B, July 24, 2018
Page 53
6.1.10. Typical Process List for GPX Cleave
Figure 33 shows a sample process list for a splice then cleave using the
GPX Cleave. It includes the views, focus, and adjustment need to
complete the process with the “one button” process.
6.2. Hot View Imaging
The Hot View Imaging provides the ability to watch the splice or taper in
real time through a special filter attached to the Ring Illuminator of the
GPX Lens. The Hot View Imaging is turned On via the Filament Ramp tab
in the Splice properties menu (Splice> Splice Properties> Filament Ramp)
The optical density filters are pivoted into place on the lens. There are 2
filters of varying densities which can be used separately or together,
depending on the amount of illumination coming from the filament.
Figure 34
Splice Properties – Filament Ramp Tab
Figure 33
Typical Process
List for Splice then Cleave
