Stabilized Benchtop IR Light Source
Chapter 4: Getting Started
Page 8
CTN010315-D02
4.3.3. Controller Back Panel
Figure 4.4 Back Panel of SLS303 Controller
•
C5. Cooling Fan
•
C6. Connector for Lamp Control Cable
•
C7. Analog Out, 0-5V
•
C8. Power Connector
•
C9. Fuse Socket
4.4. Setup
Take the lamp housing out of its packaging and place it onto a table top. All four feet are height adjustable to
compensate for unevenness of the work surface.
To adjust the height, use a 4 mm ball driver or hex key (one is included with the SLS303) to loosen and remove the
cap.
Figure 4.5 Removing Caps on the Adjustable Feet
