MTS25-Z8 and MTS50-Z8 DC Motorized Translation Stages
Page 8
19593-D02
3
4
5
6
2
1
5) Fit the four bolts supplied M3 x 6 (4-40 x 1/4”) through the holes in the underside
of the spacer plate and screw into the base of the upper stage.
6) Tighten the bolts to secure the stage in place.
7) Fit the base plate to the X-axis (lower) stage, and bolt the assembly to the
worksurface as detailed in Section 3.2.4.
3.2.6 Building an XYZ Configuration
Assemble an XY configuration as detailed in Section 3.2.5. then, referring to Fig. 3.5,
proceed as follows:
1) Fit the shorter dowels supplied, into the moving platform on the upper stage of the
XY assembly.
2) Fit the angle bracket (MTS25C-Z8 or MTS50C-Z8) onto the moving platform of the
stage, ensuring that the dowels fitted at item (1) locate correctly in the holes on
the underside of the angle bracket.
Fig. 3.5 Adding a Vertical Axis Stage
