THORLABS Kinesis MLJ050 User Manual Download | Manualshive

Page: 5 / 44

background image

5

MLJ050 Motorized Lab Jack

2.1.1

Introduction

The MLJ050 stages share many of the benefits of the Thorlabs range of motor
controllers. These include USB connectivity (allowing multiple units to be used
together on a single PC), fully featured Graphical User Interface (GUI) panels, and
extensive software function libraries for custom application development.

The Kinesis software suite provides a flexible and powerful PC based control system
both for users of the equipment, and software programmers aiming to automate its
operation.

The User Interface allows full control of all settings and operating modes enabling
complete ‘out-of-box’ operation without the need to develop any further custom
software. It provides all of the necessary system software services such as generation
of GUI panels, communications handling for multiple USB units, and logging of all
system activity to assist in hardware trouble shooting. The Kinesis server is also used
by software developers to allow the creation of advanced automated positioning
applications very rapidly and with great ease.

2.1.2

Kinesis Server

Kinesis controls are re-usable compiled software components that supply both a
graphical user interface and a programmable interface. Many such Controls are
available for Windows applications development, providing a large range of re-usable
functionality. For example, there are Controls available that can be used to
manipulate image files, connect to the internet or simply provide user interface
components such as buttons and list boxes.

With the Kinesis system, .Net Controls are deployed to allow direct control over (and
also reflect the status of) the range of electronic controller units, including the MLJ050
stages. Software applications that use .Net Controls are often referred to as 'client
applications'. A .Net Control is a language independent software component.
Consequently the controls can be incorporated into a wide range of software
development environments for use by client application developers. Development
environments supported include Visual Basic, Labview, Visual C++, C++ Builder,
HPVEE, Matlab, VB.NET, C#.NET and, via VBA, Microsoft Office applications such as
Excel and Word.

«
...
3
4
5
6
7
...
»

Summary of Contents for Kinesis MLJ050













































Reviews:

No comments

Related manuals for Kinesis MLJ050

Brand: AIRSLED Pages: 8

Brand: Pkm Pages: 26

Brand: QuickJack Pages: 72

Brand: Haklift Pages: 45

Brand: Sealey Pages: 3

Brand: Daytona Pages: 8

Brand: Sunex Tools Pages: 19

Brand: WORKERS BEST Pages: 88

Brand: SATA Pages: 60

Brand: SATA Pages: 76

Brand: SATA Pages: 80

Brand: SATA Pages: 120

Brand: Luna Pages: 24

Brand: Sealey Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands