16
Chapter 6
PC Operation
6.1
Introduction
The following brief tutorial guides the user through a typical series of moves and
parameter adjustments performed using the Kinesis software. It assumes that the unit
is electrically connected as described in Section 4.2. and that the software is already
installed - see Section 4.1.
6.2
Using the Kinesis Software
The Kinesis software application allows the user to interact with any number of
hardware control units connected to the PC USB Bus. This program allows multiple
graphical instrument panels to be displayed so that multiple units can be controlled.
All basic operating parameters can be set through this program, and all basic
operations (such as motor moves) can be initiated. Parameter settings can be saved,
which simplifies system set up whenever the software is run up.
Fig. 6.1 Typical Kinesis User Screen
1) Run the Kinesis software - Start/All Programs/Thorlabs/Kinesis/Kinesis
Summary of Contents for Kinesis MLJ050
Page 1: ...MLJ050 Motorized Lab Jack Kinesis User Guide Original Instructions ...
Page 42: ...42 D 3 CE Certificate ...
Page 43: ...43 ...
