3.2 Menu items
ITC5000
/ page 36
Enter the IP Address of your TXP mainframe (this address is given to the TXP in the
initialization process with the TXP-Administrator program) and if necessary (ask your
system operator) also the port number and a timeout value under ‘Advanced’:
The timeout value is the wait-time after which the program card yields a connection
error if the ITC does not respond.
3.2.3 The ‘Setup’ menu
•
LD Current Control Setup: Set the diode polarities, operating mode, calibration
values and bias voltage
•
Temperature Control Setup: Enter your thermistor calibration data
•
Temperature Window Setup: Enable and set a temperature window
