3.1 Operating elements in the main window
ITC5000
/ page 29
3.1.1 Select the Display Variables
In the TEC part of the main-screen as well as in the Laser Diode part, you can
simultaneously select and watch two operating parameters.
For the TEC:
•
The thermistor temperature in °C, recalculated from its resistance
•
The thermistor temperature in K, recalculated from its resistance
•
The thermistor resistance
•
The measured TEC current
•
The measured TEC voltage
For the Laser Diode:
•
The measured Laser Diode current
•
The measured monitor Diode current
•
The calculated optical power in mW
•
The calculated optical power in dBm
•
The measured Laser Diode voltage
Just click on the black down arrow and select the desired value from the displayed
field.
NOTE
To display correct calculated values like temperature in °C etc., you must
have entered the correct calibration values in the ‘Setup’-section!
A red display indicates an overflow condition!
