ELL18K Rotation Stage Evaluation Kit
Chapter 3: Description
Page 4
DTN000524-D02
3.2. Mounting
Warning
The safety of any system incorporating this equipment is the responsibility of the person performing the
installation.
Caution
Although the module can tolerate up to 8kV of air discharge, it must be treated as ESD sensitive device. When
handling the device, anti-static precautions must be taken and suitable discharge appliances must be worn.
Do not expose the stage to magnetic fields as this could affect the positioning and homing sensor operation. An
external magnetic field close to the sensor should be below +/- 5mT.
When handling the stage, take care not to touch the wires to the motors.
Do not bend the wires over the motor spring as this affects the performance of the unit.
Do not allow the wires to contact other moving parts.
The recommended mounting orientation is horizontal. Two mounting brackets are shipped with the ELL18K/M
kit to allow mounting to a standard 1” or 25 mm pitch optical table or breadboard.
Figure 1 ELL18 rotation stage
