THORLABS DMH40-F01, Operation Manual

Page: 37 / 66

© 2021 Thorlabs
4 Operation
32
Drag & Zoom
Press and hold the left mouse button, the draw an rectangle around the area of interest. By re-
leasing the mouse button, the display zooms in the marked area.
Press Zoom Home to reset the diagram - all recorded values are restored.
Press Save to save the accumulated temperature values to either a *.CSV file or an image.
Saving as an image is possible in BMP, JPG or as a transparent PNG.
Press Clear Diagram to delete the temperature record and restart the temperature logging.
All settings made to the Thorlabs Deformable Mirror software are saved when terminating the
program, and are restored with the next software session.
4.6.10 The Configuration File
The configuration file comprises of three main parts:
·
General information: Information about software version, driver version and the recognized
instrument
·
Application settings
- Size and position of the GUI
- Active Control Panel
- Color Style
- ID Overlay Status
- Zernike Pattern Orientation
- Control Loop Settings (delay, selected Zernikes)
· Data
- Status of hysteresis compensation
- Voltage pattern that is applied to mirror segments
- Zernike amplitudes (for information only)
- Zernike slider positions
At the first start of the Thorlabs Deformable Mirror software, a default configuration is loaded.
The table below shows the details of this configuration:
Default Configuration
25
29
21
22
20