33
2- and 3--Channel Brushless DC Servo Controller
5) In the ‘Control Unit’ field, select ‘3 Ch Brushless DC Driver (BBD103)’.
6) Enter a 6 digit serial number.
7) Click the 'Add' button.
8) Repeat items (1) to (7) to build the required system. (A unit can be removed from
the configuration by selecting it in the 'Loaded Configuration Details' window and
Note
Each physical APT hardware base unit is factory programmed with a
unique 8 digit serial number. In order to simulate a set of ‘real’ hardware
the Config utility allows an 8 digit serial number to be associated with
each simulated unit. It is good practice when creating simulated
configurations for software development purposes to use the same serial
numbers as any real hardware units that will be used. Although serial
numbers are 8 digits (as displayed in the ‘Load Configuration Details’
window, the first two digits are added automatically and identify the type
of control unit.
The prefixed digits relating to the BBD102 and BBD103 stepper
controllers are:
73xxxxxx - 3 Channel Brushless DC Driver (BBD103)
Note. The ‘73’ prefix described above is applicable only to the base units.
The serial number of the individual driver cards is prefixed by ‘94’ - see
