Thoreson-McCosh Inc
EDITION 05/07/10
7
IB201001.doc
SECTION 2.5 UNITS WITH COMPLETE DRYING HOPPER
Clean the inside of your hopper thoroughly to avoid contamination of plastics resin to be
processed. Install the balanced flow air diffuser inside of the drying vessel with the
mounting plate and bolts supplied. Your drying hopper is made in two sections for ease of
cleaning and installation. To remove the barrel of the hopper, lift it
out of its “seat” on the
hopper cone. If you have purchased a machine-mounted hopper, install the hopper cone
mounting plate to the feed throat of your molding machine, being sure that it is well
secured. Refit the hopper barrel into its “seat” on the ho
pper cone, being sure that it is
located and clamped properly with the stainless steel ring clamp provided.
NOTE: The T-bolt should have a light application of grease on the threads or the T-
bolt will score and lock-up in the clamp.
SECTION 2.6 UNITS WITH HOPPER EXTENSIONS
Clean the inside of your extension thoroughly to avoid contamination of plastic resin. Install
the balanced flow air diffuser with the mounting plate and bolts supplied.
Place the extension on your machine hopper, being sure that the extension is centrally
located on the machine hopper and properly secured.
