Installation Types
This ice maker has been designed for Mobile (free-standing) installation.
However, it can also be Enclosed (as under a cabinet) or Built-in (sealed to the
floor). In any case, there must be adequate air space around the unit for
ventilation.
Mobile installation:
A mobile installation will allow you to install the ice maker free-standing in any
place you desire provided you have access to a water supply. You must follow the
stated instructions for
a. Electrical
requirements
b. Water supply
c. Leveling the ice
maker.
Enclosed Installation:
An enclosed installation will allow you to install the ice maker under a cabinet
or in a kitchen cabinet provided the required clearance space around the ice
maker is respected. This installation has the same requirements as a mobile
installation.
Built-in installation:
If this method of installation is chosen, it will still be necessary to allow
adequate ventilation space around the unit. The following additional items must
be observed.
1. Place ice maker in front of installation location. Remove the feet and place the
unit flat on the floor or on a platform depending on your installation
requirements.
2. The water supply line must be plumbed before connecting to the ice maker.
3. Turn on main water supply and tap. Check for water supply connection leaks.
Tighten every connection (including connection at the water inlet).
4. If the electrical outlet for the ice maker is behind the cabinet, plug in the ice
maker.
5. Push the ice maker into position.
6. Seal all around the cabinet to the floor with an approved caulking compound.
IMPORTANT: Be sure the drain hose is connected and fed into the drain
line before the ice maker is moved into its final position.
15
