Check if the water supply pressure is
below 15 psig.
Check water supply or filter may
be restricted.
Cubes
are
partially formed
or are white on
the bottom.
Not enough water in
the water trough.
Check for a water leak at the water trough.
The feet are not leveled
and locked.
Level and lock the feet. See
Leveling the Ice Maker.
Noise
during
operation
Certain sounds are normal. See
Normal Sounds
.
The electricity is off.
Reconnect the power supply line.
The environment
temperature is out of
the stated range.
The ice maker
stops suddenly
while making ice.
The ice storage bin is full
of ice.
The ground line isn't
in the socket.
Use a socket meeting the
grounding requirements.
machine.
The hardness level of
the water is too high.
Install a water-softening device in
front of the water inlet.
Remove the ice storage bin and
clean the drainhole.
Water leaks
from the ice
storage bin
Check the drain hose to be sure
water can be drained out unhindered.
Buzzer alarm
Problem in pumping
out water
Check for correct operation of pumping
out water pump, water lever switch and
drain tube
28
Cut off the electricity and leave the ice
maker disconnected until the temperature
returns to within the stated range.
Remove some ice cubes; make
sure the ice-full probe is free of ice.
The body of the ice
maker is electrified
Scaling occurs
frequently inside
the machine.
The drainhole below the ice
storage bin is blocked.
The drain hose is kinked
or improperly placed
higher than the floor of
the ice storage bin.
