11
Cleaning and Maintenance
Trivets and Burners
a. Remove the trivets from the top of the
appliance (Refer to pic1).
b. Remove the burner from the top of the bracket of
appliance (Refer to Pic2).
c. The trivets and burners should be cleaned with a mild
detergent and hot water solution using a soft bristled
brush. Dry thoroughly with a dry cloth.
Stainless Steel Surfaces
a. With the trivet and burners removed, clean the
interior and exterior surfaces of the Gas Hot Plate
with hot water, a mild detergent solution and a soft
scrubbing brush. Note that the gas control knobs are
a push fit onto the gas control valve spindles and can
be removed to allow cleaning of the front of the
control panel.
b. Baked on deposits or dis-colouration may require a
good quality stainless steel cleaner or stainless steel
wool. Always apply cleaner when the appliance is
cold and rub in the direction of the grain.
c. Dry all components thoroughly with a dry cloth and
polish with a soft dry cloth.
Pic1
Pic2
d. To remove any dis-colouration, use an approved stainless steel cleaner or stainless steel wool.
Always rub in the direction of the grain.
e. Remove the drip tray and clean with a mild anti-bacterial detergent and hot water solution using a
soft bristled brush.
f. Dry the drip tray thoroughly with a dry cloth.
