3
Specifications
General
Commercial gas salamander.
Pack Contents
The following is included:
Thor Gas Salamander
1pcs racks
4pcs Feet
（
optional
）
Instruction Manual
Wall Mounting Bracket, including:
-2 x 25mm Black Plastic Spacer.
-2 x 3/8” Bolts/Nuts
-6x 30mm Screw Tox.
-6 x ST4.9x30 screws
Gas Supply Requirements
Natural Gas
Propane
ULPG
GE559-N
GE559-P
GE559-P
Single burner Heat Input
16MJ/Hr
16 MJ/Hr
16 MJ/Hr
Heat Total
32 MJ/Hr
32 MJ/Hr
32 MJ/Hr
Burner Operating
1.0 kPa
2.75 kPa
2.75kPa
Minimum inlet supply
pressure
1.13 kPa
2.75 kPa
2.75 kPa
Gas Connection
¾” BSP Male
¾” BSP Male
¾” BSP Male
The burner operating pressure is to be measured at the gas control valve outlet test point with two burner
operating at ‘High’ setting. The operating pressure is ex-factory set, through the appliance regulator and should
not to be adjusted, However the pressure must be checked during installation to confirm adequate supply
pressure is available. (Test point for checking gas pressure is located by removing right side panel. Turn gas
supply off before removing test point screw.)
Minimum input of burner:
13MJ for LPG, 13MJ for NG
