Tel: (800) 521-8467
Email: [email protected]
H-HDMI-RF-PETIT
12.
Never insert objects of any kind into the modulator through openings as the objects may touch dangerous voltage and will void
the warranty. Refer all servicing to authorized service personnel.
13.
Unplug the modulator from the wall outlet or PDU and refer servicing to authorized service personnel whenever the following
occurs:
The power supply cord or plug is damaged
Liquid has been spilled into or objects have fallen into modulator
The modulator has been exposed to rain or water
The modulator has been dropped or the chassis has been damaged
The modulator exhibits a distinct change in performance
14.
When replacement parts are required, ensure that the service technician uses replacement parts specified by us. Unauthorized
substitutions may damage the modulator or cause electrical shock or fire, and will void the warranty.
UNPACKING and HANDLING
The H-HDMI-RF-PETIT is shipped with all equipment assembled, wires, factory tested, and then packaged in an appropriate
shipping container.
Unit Inspection
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no wire, cable, or connectors
are broken, damaged or loose.
Precautions:
Avoid heat buildup
Ensure easy access to rack wiring
Facilitate servicing and maintenance
Avoid direct heating or air conditioning
Make sure rack supports are sufficiently rigid to support racks
Beware of dripping water onto equipment form leaky roofs, waveguide roof entries and pipe condensation
Should any damage be discovered after unpacking the unit, immediately file a claim with the carrier. A full report of the
damage shall be made and a copy forwarded to Seller.
