Tel: (800) 521-8467
Email: [email protected]
WARNING: TO PREVENT SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
H-HDMI-RF-PETIT
GENERAL
Power Supply
DC12V 1A
Power Consumption
< 10W
Net Weight
0.36KG
Dimension
136*165*25 (mm)
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER FROM THIS UNIT.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS
1.
Read all safety and operating instructions before you operate the modulator
2.
Retain all safety and operating instructions for future reference
3.
Heed all warnings on the modulator and in the safety and operating instructions
4.
Follow all installation, operating and use instructions.
5.
Unplug the modulator from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the
modulator
6.
Do not use accessories or attachments not recommended by us, as they may cause hazards, and will void the warranty
7.
Do not operate the modulator in high-humidity areas, or expose it to water or moisture.
8.
Do not place the modulator on an unstable cart, bracket or table. The modulator may fall, causing serious personal injury and
damage to the modulator. Install the modulator only in a mounting rack designed for 19” rack-mounted equipment.
9.
Do not block or cover slots and openings in the modulator. These are provided for ventilation and protection from overheating.
Never place the modulator near or over a radiator or heat register.
10.
We strongly recommend using an outlet that contains surge suppression or ground fault protection. For added protection during
a lightning storm, or when the modulator is left unattended for long periods of time, unplug it form the wall outlet or PDU and
disconnect the lines between the modulator and its source. This will prevent damage caused by lightning or power line surges.
11.
Do not overload wall outlets or extension cords, as this can result in a risk of fire or electrical shock.
