H-IRD-V4 Manual
37
Detailed Explanation:
Play Mode: You can select a play mode for the *.ts files as needed before playing the *.ts
file and specify a video under ‘Single file’ / ‘Single loop’ mode and press “Enter” button
to start play. While under ‘Play all’ / ‘Loop all’ mode, it automatically plays files from
first to end.
File Name: Enter this menu to edit name for the *.ts files to be recorded. For example, if
users name it “Record-”, it will give name to the saved *.ts files “Record-001.ts”,
“Record-002.ts” “Record-00N.ts”.
File Size: Set the file size for the *.ts to be recorded. A single file can be maximum
2000M in size.
There are 3 File record modes provided:
“Single file”: For example, when the file size is set as 1000M and the *.ts is recorded
up to 1000M, it automatically stops recording TS.
“Segment file”: For example, when the file size is set as 1000M and the *.ts is
recorded up to 1000M, it automatically saves the files and continues to record TS and
save it to next file until the USB memory is full.
“Loop record”: It automatically saves the files and continues to record TS and save it
to next file. When the USB memory is full, it replaces the previous file.
Parameters
→
Network:
Click ‘Network’, it will display the interface as Figure-17 where to set network
parameters.
Figure-17
Use this IP to connect the
device to PC for management.
