H-IRD-V4 Manual
22
Check symbol rate here.
RF Frequency
The RF output frequency range is from 30 to 950MHz with 1K stepping.
After entering the RF frequency setting submenu, press LEFT, RIGHT, UP,
and DOWN buttons to adjust the frequency and confirm by press ENTER
button.
RF Out Level
The RF attenuation range is from -30~0dbm (77~107dbµV) with 0.1db step.
After entering this setting submenu, you can shift UP/DOWN/LEFT/RIGHT
key to set the output level and press ENTER to confirm.
RF On
This interface is to decide whether to enable the RF (carrier A) output or not.
OFF
: to disable programs to output through carrier A.
ON
: to enable programs to output through carrier A.
Bitrate
The current actual bitrate and the maximum bitrate the carrier supports
RF Frequency
750.000 MHz
RF Out Level
-10.0 dbm
Symbol rate
5310 Ksps
RF On
Off On
Bitrate(Act/Max)
XX.XXM/ XX.XXM
