H-IRD-V4 Manual
35
Parameters
→
PID Pass:
From the menu on left side of the webpage, clicking “PID Pass”, it displays the interface
where to add the PIDs which need pass through. (Figure-12)
In some occasions, there are some PIDs which won’t belong to any program, such as
EPG, NIT tables and so on which user just wants to pass them through the multiplexing
module without changing anything. This is the main purpose of this function.
Figure-13
Parameters
→
Modulator:
From the menu on left side of the webpage, clicking “Modulator”, it will display the
Modulator Configuration screen as Figure-14. Here you can set modulation parameters.
Figure-14
Parameters
→
IP Stream:
Use this setting for TS to output in IP (4*MPTS) format through the DATA port.
Click ‘IP Stream’, it will display the interface as Figure-15 where to set IP out
parameters.
Click this button to
generate more rows
to add PIDs.
To select the output carrier(s)
