November 13th 2017
www.thonk.co.uk
8
Spring Reverb Mk ii
(November 2017 onwards)
Eurorack DIY Kit
Instructions
Version 1.00
18.
Next find the larger bag of
mechanical parts and pull out the
five
IC Sockets
.
Make sure the
notches
in the
sockets match the
notches
on the
silkscreen. Solder to
BOTH PCBs
19.
Return to the cap bag and find the
two
Red
33nF
Polybox
caps and
solder into positions
C3
&
C4
20.
Return to the cap bag and find the
single
22uF electrolytic cap.
Make
sure to identify the different caps by
the value written on them!
Solder
into position
C109.
NOTE!
The orientation is vital, the
shorter lead on the component
should go to the circular pad
marked with a minus ‘-‘ on the PCB.
Note the component has a grey
stripe on the cylindrical body on the
minus side, the grey stripe should
be facing the adjacent yellow
ceramic cap.
notch