November 13th 2017
www.thonk.co.uk
3
Spring Reverb Mk ii
(November 2017 onwards)
Eurorack DIY Kit
Instructions
Version 1.00
SPRING REVERB BUILD INSTRUCTIONS
1.
To start with we advise emptying
the bags into two separate bowls or
containers so it makes it easier to
find parts.
This document has hi-res images.
ZOOM IN
for a closer look
2.
There are two PCBs included in the
kit, FRONT and BACK as shown.
We will be soldering components to
both boards during the build so
care must be taken to not absent-
mindedly solder parts to the wrong
board!
BACK PCB
FRONT PCB
3.
First identify the resistor bag with
the nine
100K
resistors and solder
into the positions shown on the
FRONT
PCB
R4, R5, R8, R9, R12, R13, R21,
R22, R23
4.
In the same bag you’ll also find two
6.8K
resistors, solder them into the
positions
R11
and
R19
shown on
the
BACK PCB