November 13th 2017
www.thonk.co.uk
11
Spring Reverb Mk ii
(November 2017 onwards)
Eurorack DIY Kit
Instructions
Version 1.00
27.
Next identify the
VTL5C3
Vactrol
and solder into position as shown
on the
BACK PCB
NOTE!
The orientation is vital, make
sure the LED text on the component
matches the LED text on the PCB.
28.
Next you will solder the female
headers to the rear of
BOTH PCBs
Take care to not solder them on the
WRONG SIDE!
29.
Next take the male pin header and
break down into one 6 pin section
and one 8 pin section.
Solder into the positions shown on
the
REAR PCB, take care to
solder them on the SAME SIDE as
the resistors etc.