Thomson
Thomson WhisperTrak™ Electric Linear Actuator - Installation Manual - 2011-06
9
4.6 Wire cross sections
To avoid malfunction due to voltage drop the cross section of the wires between the actuator motor and the
power source must be of sufficient size. For longer cables than stated in the table calculations based on the
supply voltage, the current draw, the lenght of the cables and the ambient temperature must be done.
Installation
Wire cross sections
Lenght of cable (L)
Min. allowed cross section (X)
00 - 10 m
1.0 mm
2
(AWG 18)
10 - 20 m
1.5 mm
2
(AWG 14)
