Thomson
Thomson WhisperTrak™ Electric Linear Actuator - Installation Manual - 2011-06
4
General
1. General
1.1 About this manual
This manual decribes how to install the Thomson WhisperTrak™ electric linear actuator both mecanically
and electrically. It also contains, among other things:
• technical data
• dimensional drawings
• type designation key.
It is important to carefully read this manual before installing the actuator and to have the correct
qualifications needed to perform the installation.
1.2 Target group
This manual addresses qualified mechanical and electrical personnel.
1.3 Symbols used
This symbol is shown to highlight a general warning, general instruction or as a warning for a
mechanical hazard.
1.4 Transport and storage
The actuator may only be transported and stored in the original packaging supplied by Thomson. The
temperature during transportation and storage must be between -25 to +40 °C
(-13 to +104 °F). Avoid
shocks to the package. If the package is damaged, check the actuator for visible damage and notify the
carrier, and if appropiate also Thomson.
1.5 Packaging
The packaging consists of a cardboard box. The box contain the actuator and this manual.
1.6 Disposal
Where required by law, used packaging and actuators are taken back by Thomson for professional
disposal if the transportation cost is taken over by the sender. Please contact Thomson for information on
where to ship it.
1.7 Support
In case you need technical support or any information related to this product, please contact the nearest
Thomson Service Center. See the back of this manual. You can also visit www.thomsonlinear.com for
information on this product and how to get in touch with us.
