6
Installation of receiver
1.
Place the receiver (5) on, or near, the second television set.
2.
Connect the receiver (5) to the second television set using the lead (6) following the same
instructions as for the transmitter.
3.
Extend the antenna on the receiver (5) and orient it toward the main TV set (TV1).
4.
Fit the AC adaptator (9V, 400mA) (7) to the receiver and plug it into a 220/240 V ~ 50 Hz
mains power supply.
! THE ANTENNA
allows you to transmit and receive audio and video signals over a maximum range of
80 meters in free air environments. Inside a typical lodgment the range will be less because of signal
attenuation by building material absorption.
! THE FLEXIBLE ANTENNA
permits the control of the unit whose pictures you wish to see in the
room containing the second television set (
TV2
).
! THE POWER SUPPLY
plug fitted to the transmitter (
1
) is not the same as the one fitted to the
receiver (
7
).
Receiver
Receiver
AUDIO OUT
L
R
DC 9V
VIDEO OUT
6
TV2
5
7
220/240V ~ 50 Hz
UNITED-
KINGDOM -
EIRE
CONTINENTAL
EUROPE
01_VS470_en 24/08/04 10:34 Page 6
