manualshive.com logo in svg

THOMSON VMD 6, User Manual, Page: 73 / 82

Share
Download
THOMSON VMD 6 User Manual Download Page 73

72

 EN

INDEX

  Indications (cont.)

Indications

 Function

●

Appears if dubbing of copyguarded signals is attempted while this
camcorder is being used as a recorder.

(

 pg. 45)

●

Appears in the following cases when dubbing from a tape to a
MultiMediaCard:
– when no MultiMediaCard is loaded.
– when the MultiMediaCard's memory is full.
– when the MultiMediaCard is not formatted.

(

 pg. 47)

●

Appears in the following cases when dubbing still images stored in the
MultiMediaCard’s memory to a tape:
– when condensation occurs.
– when no tape is loaded.
– when the erase protection tab is set to “SAVE”.
– when a tape in another format is loaded.
– when the tape ends.

(

 pg. 46)

Appears if a MultiMediaCard is not loaded when SNAPSHOT is pressed
while the Power Switch is set to “

” or “

” and the VIDEO/DSC Switch

is set to “

”.

Appears when there is a problem with a MultiMediaCard and its memory is
corrupt, or it has not been initialised. Initialise the MultiMediaCard.

(

 pg. 39)

Appears if there are no images stored in the MultiMediaCard when the
Power Switch is set to “

” and the VIDEO/DSC Switch is set to “

”.

The error indications (E01 — E06) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest THOMSON
dealer.

NO STORED IMAGE

E01 — E06

UNIT IN SAFEGUARD

MODE REMOVE AND

REATTACH BATTERY

PLEASE

FORMAT

MEMORY CARD!

COPYING FAILED

VMD6 EN(40/80)

28/08/00, 16:08

72

Summary of Contents for VMD 6



















































































Reviews:

No comments