THOMSON TR-069 Configuration Manual Download Page 57

Page: 57 / 110

E-DOC-CTC-20071119-0003 v1.0

Monitoring and Diagnostics

For example, the

GetParameterValuesResponse

(message 2 in preceding illustration) contains, amongst

others, following name-value pairs in its ParameterList argument:

WLAN statistics

The object “InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.“ is relevant to the WLAN statistics.

This object on the Thomson Gateway contains following vendor specific parameters:

X_000E50_ChannelMode: this parameter can be used to request automatic selection of the channel. The
parameter has one of the following values:

Auto (default value)

Manual

To retrieve the WLAN statistics, the

GetParameterValues RPC

(message 1 in preceding illustration) contains

following ParameterNames argument:

For example, the

GetParameterValuesResponse

(message 2 in preceding illustration) contains, amongst

others, following name-value pairs in its ParameterList argument:

Name

Value

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.Enable

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.Status

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.UpstreamCurrRate

832

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.DownstreamCurrRate

8128

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.UpstreamMaxRate

1024

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.DownstreamMaxRate

8224

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.UpstreamNoiseMargin

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.DownstreamNoiseMargin

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.UpstreamAttenuation

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.DownstreamAttenuation

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.ShowtimeStart

19760

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.X_000E50_NumberOfResets

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.Stats.ShowTime.
X_000E50_LossOfSignal

InternetGatewayDevice.WANDevice.1.WANDSLInterfaceConfig.Stats.ShowTime.
X_000E50_LossOfPower

Entry

Value

InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.

Name

Value

InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.Enable

InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.Status

InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.BSSID

00:14:7f:0e:14:fc

Summary of Contents for TR-069














































































































Search results

Summary of Contents for TR-069

Reviews:

Related manuals for TR-069

Brands by name

Popular brands

THOMSON TR-069, Configuration Manual

Search results

Summary of Contents for TR-069

Reviews:

Related manuals for TR-069

Brands by name

Popular brands