EN-16
TROUBLESHOOTING
In case of mini-function, please refer to the following table
Problem
Possible causes
Solution
3 lamps
for power
indicator
flicker
The rolling bar is wrapped
Temperature is too high or low
Cleaning the rolling bar
Mover the vacuum to
suitable temperature
power
brush
does not
work
Brush is trapped by hair or
larger debris
Ensure that no hair or
other thread is trapped
around the brush and
check brush area for
larger debris
Running
time
shortened
Battery needs to be replaced
Ambient temperature is too
high or too low
Battery is no fully changed
Contact the shop or
after sales service to
replace the battery fat
the user's own cost
Your vacuum should
only be operated in
suitable ambient
temperature
The battery needs
charging
The
vacuum
has no
suction
power
The dust cup is full
The filter is blocked
Suction inlet of brush or other
accessory is blocked
Parts of the appliance is not
fully dried after cleaning
Clean the dust cup
after use to prevent
build ups
Remove any dust or
debris from the filter
Check for blockages at
brush and other
attachment points
Ensure that all
components are
properly dried after
washing
Not
charging
Ambient temperature when
charging is too low or too
high
Charge the machine
under the right
temperature
environment (5
℃
-40
℃
)
