P6
fIrsTTImeInsTallaTIon
31.
YelloW
For Teletext functions. In viewing mode freeze picture.
Different functions in the specific menus.
32.
blue
For Teletext functions. Different functions in the specific menus.
3.2Installingthebatteries
Remove the battery cover from the remote control and put 2 x AAA size batteries inside the
compartment.
The diagram inside the battery compartment shows the correct way to install the batteries.
1.openthecover2.Installbatteries3.Closethecover
Fig. 7
noTe:
The batteries should not be recharged, disassembled, electrically short-circuited, be mixed
or used with other types of batteries.
3.3usingtheremoteControl
Fig. 8
The remote control transmits a directional infrared beam. Be sure to aim the remote control
directly at the infrared sensor of the unit during operation. If the sensor has been covered or
there is a large object between the remote control and the sensor, the sensor will not receive
the signal. The sensor may not be able to receive the remote signal when it is exposed to direct
sunlight or a strong artificial light (fluorescent or strobe light). In this case, change the direction of
the light or reposition the unit to avoid direct lighting.
4.0fIrsTTImeInsTallaTIon
If you use the receiver for the first time, the
Easy Install
menu appears. Use
p
/
q
to select
Region
,
OSD
Language
,
Antenna
Power
and
Scan
Mode
and
t
/
u
to select options. Then
use the
p
/
q
buttons to move focus to
Search
and press
oK
to proceed with the automatic
channel scan.
5.0maInmenu
In viewing mode press
menu
at any time to enter the Main Menu. It consists of the following
submenus:
Channel
,
Installation
,
Setup
,
Tools
and
Media
+
5.1Channel
1. Use the
p
/
q
buttons to select
Channel
and press
oK
to enter.
2. Use the
p
/
q
buttons to highlight the desired item and press
oK
to select.
3. Press
eXIT/sorTIe
to get back to the previous menu level.
noTe:
You can also press
oK
in TV mode to enter the channel list.
5.1.1TvChannellist
1. In
Channel
submenu select
TV
Channel
List
with the
p
/
q
buttons and press
oK
to enter.
2. Use the
t
/
u
buttons to change channel group (assumed you have already set up
Favourite groups).
3. With the
p
/
q
buttons select the channel you wish to watch. Press
oK
to watch the
selected channel in full screen mode
