P24
TroubLeshooTinG
7.5.3 Dvr setting
This menu allows you to configure settings for Timeshift, recording and playback.
Select
DVR Setting
in the
Media
menu and press
ok
to enter.
Use
pq
to move the highlight and
tu
to change settings.
Timeshift
:
Select between
Auto
,
Pause
or
Off
. When
Timeshift
is set to
Auto
it will automatically start every time after tuning to a
channel. When
Timeshift
is set to
Pause
it will start only after
pressing the
YeLLoW
/
2
button. Select
Off
to deactivate
Timeshift.
Step to
:
30 sec
to
30 min
. Set the time step you like to jump forward
by pressing
4
during playback of recorded files. This will only
work when the info banner is displayed on screen. If it is not,
press
info
.
Time Shift to Record
:
If set to
On
the timeshifted part will be included in your
recording when you start to record the current programme.
PS Record:
Select between
On
or
Off
. When
Off
is selected, recordings will
also include subtitles and Teletext (when available). Record to
PS mode
On
allows recordings without these extras which will
need less space on your USB device.
Press
eXiT
to leave this menu.
7.5.4 remove usb device safely
Select
Remove USB device safely
from the tools menu and press
ok
. The receiver will
display a message indicating that you can safely remove your storage device from the
receiver.
noTe:
After performing this function, the USB device is no longer
accessible from your receiver. To gain access to your storage
device again, re-insert it or switch the receiver to standby and
on again.
8.0 TroubLeshooTinG
There may be various reasons for abnormal operation of the receiver. Check the
receiver according to the procedures shown below. If the receiver does not work
properly after checking it, please contact your dealer or the local Service Hotline. Do
NOT try to open or disassemble the receiver. It may cause a dangerous situation and
warranty will be void.
