MAIN MENU
P21
En
g
lis
h
Use
pq
to select
Upgrade File
and choose the file containing the latest and correct
software.
Once all settings are made, move the highlight to
Start
and press
ok
to start the
upgrade process.
After a few seconds, the receiver asks: “Are you sure to burn flash?”. Select
Yes
to finalize
the upgrade or
No
to quit without upgrading.
noTe:
If, after a software upgrade, the receiver should behave in an
unexpected way, please perform a factory reset as well. See
chapter
7.4.2
.
Warning:
After an update the receiver restarts automatically. During the
upgrade process NEVER disconnect the receiver from the mains
or switch off the power! Doing so might damage your receiver
and will void warranty!
7.4.5 Auto-update oTA
If set to
On
the unit will check automatically at the moment of going to stand-by for
an Over The Air software upgrade. An Over The Air update might not be available in
your region. Please visit our website www.thomsonstb.net or contact your local service
hotline for more information about this option.
7.5 Media
The
Media
menu consists of the following submenus:
Media Player
,
HDD Information
,
DVR Setting
and
Remove USB device safely
.
Use
pq
to highlight the menu of choice and press
ok
to enter. Press
eXiT
to quit.
7.5.1 Media Player
This function allows playback of different kind of files from the connected USB storage
device. In the
Media
menu, select
Media Player
and press
ok
to enter this menu.
When entering the media player, the highlight is on the USB storage device. Press
q
and
ok
to open the directory respectively its folders/subfolders.
First select which files you like to play back. Use the button
1
to switch between Video/
Record/Music or Image. Press
pq
to select a file or folder and then press
ok
to open
the folder/subfolder (if applicable) or start playback of the file. Press the
eXiT
button to
exit.
Use the buttons like described below in order to choose functions during the different
playback modes (like described in the help banner below):
