En
gli
sh
13
wall, a tree or similar physical blockages could interfere with a free movement of the
antenna or motor.
Save to this position
You can store this position between 0 and 63,
OK
can be used again as described
above.
Save/Recalculation
With Save and Recalculate, you can set whether the position should be saved or a
new calculation should be made after setting this position.
Go to position
Press
OK
to move the motor to the centre position. This is only necessary for the first
time to set the antenna correctly. Then you can also select a number of a position
you already have stored or check the antenna position.
USALS selection
Configure the motor position by using the USALS function. Enter your geographic location. The motor
is able to calculate all available satellite positions, preconditioned this function is also supported by
the motor. Use
pq
to select the
Antenna Position
sub-menu.
Antenna position
:
Press
OK
to open the submenu. Use the
0 ~ 9
buttons to enter the degree of
longitude. Next, select
East
or
West
, then
0 ~ 9
to enter the latitude. Finally, specify
North
or
South
. Finally, select
Save
and press
OK
to confirm your entries.
Go to position
Press
OK
to move the motor to the desired satellite position. After computation, you
can also select other satellites, go to
Satellite
and select the desired one from the
list.
NOTE:
For detailed information about correct geographic values of your location,
visit websites such as dishpointer.com, itouchmap.com, or other reliable
sources such as professional journals.
7.1.3 Channel Search
In this menu, you can perform an automatic, network or transponder search. You can also search for
channels on all installed satellites. Use the
pq
buttons to highlight the desired item and use
t
u
to
change the settings.
Satellite
:
Here you will find a list of satellites, only select a satellite/s which is available in your
installation or have been configured previously.
If this option is marked, the name and position can be changed using the
RED
Rename Satellite
button. To do this use
pq
and
t
u
, on the shown keyboard, to
navigate.
Transponder
:
Use the
t
u
buttons to switch between the transponders of the selected satellite.
You can also press
OK
to list them. Use
pq
or
P+/P-
to scroll through the list.
Confirm your selection with
OK
. Press the
RED
button to
Edit TP
, the
GREEN
to
Add
TP
or
YELLOW
to
Delete Current TP
. Details can be found in chapter
7.1.3.1 Edit,
add or delete transponders
.
Channel type
Use
t
u
to select the channels you'd like to search for:
All
, only
Free-to-air
or
Encrypted
channels.
Scan mode
TV & Radio
searches for TV and radio channels,
TV
only for TV channels and
radio
only for radio channels.
Search for
Use
t
u
to select the search type to be performed. You can choose between the
following options:
One Satellite
: Searching on the selected satellite.
Selected Satellites
:
Search for all installed satellites. * This option displays a menu for selecting the
installed satellites. After selection, please use the
RED
Search
key to continue the
search.
NIT Table
:
NIT Scan on the selected satellite.
