turn green.
Try to get the best signal strength and quality. When the signal can no longer be improved,
fix the dish in position and press the OK button on the remote control to start the channel
search.
NOTE:
Red signal strength / quality indicator bars indicate that your dish is aimed at the
wrong satellite.
P6
FIRST START-UP
4.6 Installation process
This screen shows the progress of channel installation. During the first installation, the
terminal searches for the channels corresponding to the package of the inserted smart card
4.7 Regional channel selection
Once the channels of the TNTSAT offer have been found and saved, you will be asked to
select the regional release of national channels.
The terminal will display a list of regional channels associated with national channels. Using
thekeys,
▲ ▼
select the desired channel and press OK. When you watch a national channel
and a regional dropout is broadcast, the terminal will automatically display the content of the
previously selected regional dropout.
You can modify your choice of regional channel in themenu
Channel organization
-
Edit
regional channels
.
5.0 MAIN MENU
Press the MENU key the
Main Menu will be
displayed.
All terminal settings and functions can be operated from the menu. The main menu consists of
6 submenus Install,
Configure
Systems,
Organization
chains, Advanced,
Smart
Card.
5.1 Installation
The installation menu contains the following submenus:
Satellite settingssatellite
Allows you to configure yourdish.
Edit Satellite
Allows you to modify the list of satellites.
Manual Installation
Allows you to install channels from a preset satellite and
transponder.
Quick
installation Automatically installs the range of channels available on the ASTRA 19.2 ° E
satellite, including the TNTSAT offer.
5.1.1 Satellite settings
This menu is intended to configure the antenna parameters.
Antenna No
With a single LNB use
1
, for custom control select
DiSEqC output
if possible.
LNB type
Select the converter type using thekeys
◄ ►
. If you choose thetype,
Custom
you must
enterunder
LNB frequencies
the
frequency of the local oscillator. For use with a standard LNB
select
Universal
.
Low Frequency
This setting is only available if the selected converter type is “custom”. Press
the OK key and enter thein the window that appears
desired valueusing the numeric keys.
High Frequency
This setting is only available if the selected converter type is “custom”. Press
the OK key and enter thein the window that appears
desired valueusing the numeric keys.
LNB power
This setting is available if the selected converter type is
Universal
. Select the
desired value using thekeys
◄ ►
. Set to
On
to have
the terminal automatically select the band when sending the control signal
, or to
Off
to turn off the control signal.
