In STANDBY mode, time display
In ON mode, number of the selected channel
5. IR receiver IR receiver remote control
6. Chip
card slot Insert the TNTSAT card with the chip facing upwards to be able to access
the scrambled channels.
2.2 Rear view
Fig. 2
1. SAT input Used to connect the coaxial cable of the satellite dish's frequency
converter. 2. SAT output Used to connect another terminal (analog or digital). 3.
Infrared extension input
Used to connect the infrared extension (accessory not included, available on
order at [email protected])
4. USB port Used to connect aUSB storage device
P3
YOUR TERMINAL
5. HDMI connector
This connection allows you to broadcast the video signal in HD resolution to your TV
equipped with an HDMI input. This connection delivers the audio and
video signal over a single cable.
6. Audio connectors (left (L) and right (R)) RCA
Allows you to connect your terminal to your television or to an analog audio amplifier
with an RCA cable. The red plug corresponds to the right audio
channel, and the white plug to the left channel.
7. RCA video connector
Allows you to connect your terminal to your television with an RCA cable.
8. S / PDIF digital audio
output Coaxial output allowing you to connect your terminal to the input of your digital
audio amplifier.
9. TV Scart Allows you to connect your terminal to your television with a scart
cable. 10. Power cable
Your terminal operates with a power supply of 100 - 240 V AC (auto adjustable), 50/60
Hz +/- 5%. Check that your AC power meets these specifications before you plug your
terminal into the wall outlet.
2.3 Remote control
Fig. 3
1.q Turns the terminal on / off
2. Mutes the audio output of the terminal
3. FAV Displays the list of channel groups
4. LIST Displays the list of installed satellites
5. AUDIO Displays the list of audio languages available for the watched
channel 6. 9 Goes back to the previous channel
7. RED For teletext function and specific function in menu 8. GREEN
For teletext function and specific function in menu 9. YELLOW For
teletext function and specific function in menu 10. BLUE For function
teletext and specific function in menu 11. Displays information about the
current channel
12. EPG Displays program guide without menu
13.
▲ ▼
Changes the program to the previous / next program 14.
◄ ►
Increases
/ decreases the sound level in the absence of a menu. Changes the setting
values for the selected menu item
15. OK Confirms the highlighted menu item.
If there is no menu, displays the current list of channels
