baSIc oPeRaTIon
P9
En
g
lis
h
4.4 channel Search
In order to view video programmes, you must first do a channel search with or without smart card in order
to install the channel list of your choice. For HD+ channels, first insert the smart card at the right-hand side
of the receiver before you start the channel search. Then the receiver will install the associated channel list
of the HD+ bouquet (FTA and encrypted). For FTA channels only, you do not need to insert the smart card.
•
Select
Automatic (HD+)
to search for channels on HD+’s bouquets.
•
Select
Automatic channel search to search
for channels on all transponders for the selected satellite.
•
Select
Predefined List
to restore a predefined German channel list
Finding and storing the channels
Once the options are set, press the
GReen
button on the remote control to start the channel search. Once
a channel search is started, a progress bar and list of channels found will be displayed. At any time, you
may stop the search by pressing
exit
on the remote control. After the channel search is complete, press
the
GReen
function button on the remote control to save the channel list and exit.
noTe:
If you see the messages
No list found
or
No channels found
please check the antenna
connections and signal levels of the satellite dish.
5.0 baSIc oPeRaTIon
5.1 Programme navigation
•
You can use the numeric buttons
0~9
on your remote control.
•
You can use the directional buttons
p
q
on your remote control or on the front panel of the receiver.
•
You can use the
P+/P-
buttons on your remote control
•
Select your viewing list by pressing the
TV/Radio
or
Fav
button, select the programme list with the
navigation buttons
t
u
and confirm the selection with
ok
.
5.2 Volume control
Volume Control allows you to adjust the audio volume.
•
Press the
V+/V-
button to adjust the audio volume.
•
Press the
!
button to stop the audio temporarily.
noTe:
The mute function remains set while you switch channels.
5.3 Programme Information (Info banner)
Fig. 12
Programme information is always displayed for a certain period of time whenever you switch channels
(Fig. 10). You can view the programme information by pressing the
Info
button while watching a
programme. Press
exit
to hide the info banner.
1. Indicates channel number and name
2. Use the
p
q
buttons of the remote control to change channels
3. Informs about current programme name and timeline
4. Indicates HbbTV web service notification: The icon appears when a web-based service is available
along the broadcast on this channel. Press the
ReD
button on the remote control to launch the
service on screen.
5. Provides Parental rating information (displayed if available with the programme broadcast)
6. Use the
t
button of the remote control to scroll through valid options for the current channel
programme. The icons on the right side describe the options – see below detailed information for
each icon.
7. Displays Satellite signal quality bar
8. Provides Programme encryption information