4. Add water:
The appliance must be switched off before water filling
-Remove the water tank.
-If required, place the frozen ice boxes or ice cubes in the left side of the water tank to
increase cooling e
ff
ect.
-Fill water tank with cold tap water, taking care to not exceed the maximum line marked
on the water tank, and not below the minimum level.
Using Ice Packs
Put the ice pack in the freezer until the liquid inside becomes the ice, then put
the ice pack in the water of the tank. During the cooling function, the air will
be cooler.
Note:
-ONLY PUT THE ICE PACKS and ICE CUBES on the left side compartment of the tank as the
right side is the pump compartment and must not block the pump moving structure.
-Water level must be between the MIN and MAX line.
-After some time operation, dust and dirt may occur in water tank. It is recommended to
change water and clean water tank frequently.
5.
Only use the unit with correct AC outlet.
6.
Insert the plug pin into a wall socket, a small beep sound can be heard and the unit is on
standy mode.
Note:
- To protect against electric shock, do not remove plug from wall outlet with wet hand.
- Unplug from outlet before moving the unit.
EN-06
