2.3 OPERATION
Control panel
Control panel Remote Control
Remote control panel has the same functions as the unit control panel
Insert the plug pin into a wall socket and turn on the power switch which is at the side of the
unit. A small beep sound can be heard and the power indicator will be on.
POWER
:
Press once this button to make the unit ready for working. It will start up with MID
in 3 seconds and then revert to work under the memorized status. If first time use, it will start
up with MID in 3 seconds and then work with LOW. Press again this button to turn OFF.
SPEED
:
Press this button to select desired fan speed,
LOW
→
MID
→
HIGH
→
LOW
in turn. At the same time, display panel shows
, or
, or
.
SLEEP MODE
:
Press this button to select desired wind mode, it works as per the presetted
computer program, alternating between different fan speeds.
UP/DOWN
:
Press once this button to make vertical swing of louvers, the
indicator will
be displayed. Press again for fixed air direction.
LEFT/RIGHT
:
Press once this button to make horizontal swing of louvers, the
indicator
will be displayed. Press again for fixed air direction.
EN-07