THOMSON SpeedTouch 500 Series, Setup And User Manual

Page: 59 / 88

3 SpeedTouch™ Web Interface
E-SIT-CTC-20030306-0003 v2.0
55
NAPT C
licking this button displays the Network Address and Port Translation (NAPT) page.
This page allows you to:
• View or add/delete specific static NAPT entries:
To add static NAPT entries proceed as follows:
1 Click New.
2 Specify the outside address and inside address for the entry as well as the
protocol and port to which the entry applies.
Note If the NAPT entry is applied to a connection's dynamically assigned
local peer IP address, you should specify 0.0.0.0 as the outside address.
3 Click Apply to add the entry to the table.
•
View or add/delete Multinat Entries:
To add Multinat Entries proceed as follows:
1 Click New.
2 Specify the inside address and put the desired range between brackets e.g.
10.0.0.[1-10]. Specify the outside address and interface.
3 Click Apply.