TS 910 TRANSFER SWITCH
PM140 REV 0 12/02/09
27
Thomson Technology
18.2.
ELECTROSTATIC DISCHARGE PRECAUTIONS
CAUTION
contents subject to damage by
STATIC ELECTRICITY
The TSC 9 controller contains static-sensitive parts. Please observe the following anti-
static precautions at all times when handling this equipment. Failure to observe these
precautions may cause equipment failure and/or damage.
•
Discharge body static charge before handling the equipment (contact a grounded
surface and maintain contact while handling the equipment, a grounded wrist strap
can/should also be utilized).
•
Do not touch any components on the printed circuit board with your hands or any
other conductive equipment.
•
Do not place the equipment on or near materials such as Styrofoam, plastic and
vinyl. Place the equipment on grounded surfaces and only use an anti-static bag for
transporting the equipment.
18.3.
DIELECTRIC TESTING
Do not perform any high voltage dielectric testing on the TSC 9 controller. The control
circuit isolation plug connected to the TSC 9 must be removed if high voltage dielectric
testing is performed on the transfer switch.
