Assembling the Units
Operator's Manual LDK 20(S) - Studio Camera
2-5
The viewfinder is normally delivered separately. To
mount the viewfinder on to the top of the camera
proceed as follows:
a. Slide the viewfinder along the rails on top of the
camera until it can go no further.
b. Push both locking levers inwards and slide the
viewfinder until it firmly engages the connector.
c. Release the locking levers and ensure they click
into the lock position.
Viewfinder
To attach the viewfinder hood to the viewfinder proceed
as follows:
a. Clip the hood onto the slots on top of the viewfinder.
b. Swing it down and attach it to the front of the
viewfinder by pushing the two hood locking knobs
outwards.
c. Let go of the hood locking knobs and ensure that
the hood clips into place.
Viewfinder
Hood
Locking
Knob
Viewfinder
Hood
Locking
Knob
Viewfinder Locking Levers
Summary of Contents for LDK 20 S
