THOMSON LDK 20 S, Operator'S Manual

Page: 12 / 60

2-4 Operator's Manual LDK 20(S) - Studio Camera Assembling the Units
To mount a standard size lens to the camera head
proceed as follows:
a. Ensure that the lens locking handle
1
is in the
unlocked position.
b. Remove the dust protection cap
2
.
c. Hook the lens onto the support rail ensuring that the
upper lens pin
3
fits into the slot in the support rail.
d. Swing the lens downwards so that the lower lens
pin
4
fits into the hole in the front of the camera.
e. Turn the lens locking handle clockwise to secure
the lens in place.
To remove the lens follow this procedure in reverse.
Note
Always mount the dust protection cap when the
lens is not connected to the camera.
Lens
HiRes
Digital
Support
Rail
3
Support
Rail
Slot
1
Lens
Locking
Handle
2
Dust
protection
cap
3
4